On/Off: Press the on/off button once to turn the unit on or off.
AROMA FUNCTION
1. Press the aroma box to access it.
2. Drip essential oil onto the felt inside the aroma box. Use 1-3 drops.
3. Put the aroma box back.
4. To stop the aroma function, or when storing the humidifier, remove the felt or
replace it with a new one.
4. To stop the aroma function, or when storing the humidifier, remove the felt or
replace it with a new one.
MIST OUTLET
The mist outlet can be rotated 360 degrees.
Remove the short mist outlet before attaching the tall mist outlet.
Note: When using the short mist outlet, the humidifier needs to be placed on a
table or similar at least 70cm above the floor. This is to prevent mist gathering on
the floor or other surfaces, which can cause water damage. Check the surfaces
around the humidifier to make sure that there is no water accumulation.
The mist outlet can be rotated 360 degrees.
Remove the short mist outlet before attaching the tall mist outlet.
Note: When using the short mist outlet, the humidifier needs to be placed on a
table or similar at least 70cm above the floor. This is to prevent mist gathering on
the floor or other surfaces, which can cause water damage. Check the surfaces
around the humidifier to make sure that there is no water accumulation.
FILLING WATER
When the ‘fill water’ light turns on, it means the water level is low and you need
to add more water to the water tank.
Fill water directly into the water tank by using a bottle, carafe etc.
Do not exceed the MAX level, or;
When the ‘fill water’ light turns on, it means the water level is low and you need
to add more water to the water tank.
Fill water directly into the water tank by using a bottle, carafe etc.
Do not exceed the MAX level, or;
Remove the water tank and fill it with water directly from the tap.
Do not exceed the MAX level.
Do not exceed the MAX level.
DISPLAY
To turn the display light on or off, press and hold the timer button.
To turn the display light on or off, press and hold the timer button.
SOUND
To turn the sound on or off, press and hold the Power button.
To turn the sound on or off, press and hold the Power button.
FUNCTIONS
Mode: Press MODE to switch between the three different modes.
Note: Wilfa recommends maintaining a room humidity level between 40-55%
relative humidity. The intervals in the settings are slightly higher to compensate
for the hygrostat built into the appliance. To measure the correct humidity, we
recommend using an additional hygrometer placed further from the humidifier.
Mode: Press MODE to switch between the three different modes.
Note: Wilfa recommends maintaining a room humidity level between 40-55%
relative humidity. The intervals in the settings are slightly higher to compensate
for the hygrostat built into the appliance. To measure the correct humidity, we
recommend using an additional hygrometer placed further from the humidifier.
• Comfort: The humidifier operates with a high mist output. It can maintain a
comfortable humidity with 55-70% RH. This is a great setting to use during
daytime.
• Turbo: The humidifier operates with a rapid mist output. Choose turbo-mode
to get a quicker rise of the humidity and maintain a humidity between 50-60%
RH.
• Sleep: The humidifier operates quietly with low mist output. It will maintain
a relative humidity between 50-60 RH%. Choose sleep-mode during the
evening and night-time.
comfortable humidity with 55-70% RH. This is a great setting to use during
daytime.
• Turbo: The humidifier operates with a rapid mist output. Choose turbo-mode
to get a quicker rise of the humidity and maintain a humidity between 50-60%
RH.
• Sleep: The humidifier operates quietly with low mist output. It will maintain
a relative humidity between 50-60 RH%. Choose sleep-mode during the
evening and night-time.
Timer: Press the timer button and use the + and - buttons to set your desired
working time from 1-6 hours. To cancel the timer function, set the timer to 0H.
Mist output: Press the mist button to adjust the mist output level.
working time from 1-6 hours. To cancel the timer function, set the timer to 0H.
Mist output: Press the mist button to adjust the mist output level.