Fusion SM2B-1000FP Use

BEFORE USE
Clean the unit and parts thoroughly before you use the appliance for the first
time.

USE
HOW TO USE THE BLENDER SHAFT
The shaft is suited for preparing dips, sauces, soups, mayonnaise and baby food, as well as for mixing and making milkshakes.

  • Turn the blender shaft on the motor unit until it locks.
  • Put it in the beaker and press and hold speed 1 or speed 2.
  • While pressing speed 1 you can adjust the speed with the speed switch on top of the unit.
  • Do not use it for longer than 1 minute at a time.

Caution: The blade is very sharp!
Caution: Don’t blend food with no liquid.

HOW TO USE THE WHISK
Use the whisk only for whipping cream, beating egg whites, mixing ready-mix desserts and batter.

  • Insert the whisk into the whisk holder and then turn it onto the motor unit until it locks.
  • Place the whisk in a bowl.
  • Use the whisk for no longer than 3 minutes.
  • Turn the whisk holder off the motor unit after use. Then pull the whisk out of the whisk holder.

HOW TO USE THE CHOPPER

The chopper is perfectly suited for hard food, such as chopping meat, cheese, onion, herbs, garlic, carrots, walnuts, almonds, prunes etc. Don’t chop extremely hard food, such as ice cubes, nutmeg, coffee beans and grains. Before chopping:

  • The meat should be cut into size that does not exceed 20x20x40mm.
  • Carefully remove the plastic cover from the blade. Caution: the blade is very sharp!
  • Always hold it by the upper plastic part.
  • Place the blade on the centre pin of the chopper bowl. Press down the blade and lock bowl.
  • Place the food in the chopper bowl.
  • Place the chopping bowl lid on the chopper bowl.
  • Turn the motor unit on the chopping bowl lid until it locks.
  • During processing, hold the motor unit with on hand and the chopper bowl the other.
  • After use, turn the motor unit off the chopping bowl lid. Then remove the chopping bowl lid. carefully take out the blade.
  • Remove the processed food from the chopper bowl.
  • Operate with highest speed and do not exceed 30 seconds.